Mega-Track Hanger Long for film grip rigging, suitable for hanging 140 or 300 series track onto pipe grids or individual pipes
Mega-Track Hanger Long for film grip rigging equipment, designed for hanging 140 or 300 series tracks from upper pipe grids.
Mega-Track Hanger Long for film grip rigging systems on pipe grids.
Mega-Track Hanger Long for film grip rigging on pipe grids or individual pipes
Mega-Track Hanger Long for film grip rigging hangs from the upper pipe of grid.
Mega-Track Hanger Long for film rigging and grip, designed to secure 140 or 300 series track to upper pipe grids.
Mega-Track Hanger Long for film grip rigging, designed to hang 140 or 300 series track onto pipe grids or individual pipes.
Mega-Track Hanger Long for film grip rigging, suitable for hanging 140 or 300 series track onto pipe grids or individual pipes
Mega-Track Hanger Long for film grip rigging equipment, designed for hanging 140 or 300 series tracks from upper pipe grids.
Mega-Track Hanger Long for film grip rigging systems on pipe grids.
Mega-Track Hanger Long for film grip rigging on pipe grids or individual pipes
Mega-Track Hanger Long for film grip rigging hangs from the upper pipe of grid.
Mega-Track Hanger Long for film rigging and grip, designed to secure 140 or 300 series track to upper pipe grids.
Mega-Track Hanger Long for film grip rigging, designed to hang 140 or 300 series track onto pipe grids or individual pipes.

Mega-Track Hanger Long

$21.88
 - $25.10
$0.00
/
Subscription

Select an option to add this to your cart

The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids or from individual pipes.

There are two versions of the Mega-Track Hanger. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the track just 3/16 of an inch below the grid pipe.

The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset length from the track to the pipe the diameter of the bottom grid pipe plus 3/16 of an inch. The Mega-Track hanger Long has two different track hanging slots so that it will work with either 1-1/2" or 1-1/4" schedule 40 pipe grids. Both of the Mega-Track Hangers use a Mega-Gridlock half to fasten over the pipe and secure from below with four 5/16" socket head screws. The Mega-Gridlock half has slots along the edge that act like a wrench to hold the four Nylock nuts from turning during installation. Only a slight downward pressure with your fingers is required to hold a nut in place for installation. The track hanger slides over the track prior to placing the track in position. Support track approximately every 4 feet.

Working Load Limit

300 Pounds

Hardware

4 each 5/16-inch × 2-inch socket head Cap Screws and Nylock Nuts

Dimensions

3.65 × 3.65 inches

Weight

1.22 lbs.

Available

Recently viewed

You may also like